Starting Your Digital Video Camera
Power on
Press the Power button on the side of the camera to power on the camera.
The LCD will light up and the Video mode will appear by default indicating that you camera is ready to use to
capture videos.
If you have not inserted a compatible SD memory card, a “NO CARD” message will appear in the center of the
LCD screen. Please insert an SD card in order to continue using the camera.
Power off
Press the Power button to power off your camera.
Auto Power off
Your camera will automatically power off if idle for 60 seconds or if there is insufficient battery power.
Change Camera Mode
Press the Mode button to change between the 3 camera options - Video, Camera and Playback.
The icon of the selected mode will appear on the LCD.
To Next Page
Loading...
