2. Turn on the TV and the video camcorder, and then set the TV to “AV” mode.
3. When the video camcorder is set to record, capture or playback mode, you can preview the
images you want to record on the TV screen.
4. When the video camcorder is set to Playback mode, you can review all the pictures, videos
and audio clips stored in the video camcorder on the TV.
Install the Vivitar Experience Image Manager Software
Warning: Do not plug your camcorder into the computer until the software installation is
complete
You must be connected to the internet to install and run the Vivitar Experience Image
Manager software.
1. Insert the installation CD into your CD-ROM drive. The installation screen should automatically
open.
To Next Page
Loading...
