Connect your camcorder to the computer
1. Use the USB cable that came with your camcorder to connect your camcorder to your
computer.
2. Turn the camcorder on by pressing the Power On button.
3. The first time you connect the device to the computer you will have to wait a few seconds until
the computer recognizes the device.
4. As your camcorder is a mass storage device “MSDC” will appear on the LCD for a second and
then the screen will go blank, indicating that your camcorder is in Mass Storage Mode.
Get photos and videos from your camcorder to your
computer
An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel
the transfer of any files on their way to your computer.
1. Select the “Get Images” button from the Main menu.
To Next Page
Loading...
