Photo Capture Mode
The Photo Capture Mode allows you to capture photos with your digital camcorder.
When you first power on the camcorder, the Video Capture Mode will be active.
In order to open the Photo Capture Mode, touch the Mode icon until the Photo Capture Mode icon
appears.
Taking a Picture
1. While in Photo Capture Mode use the LCD display to direct the camcorder at the scene
you would like to capture.
2. Touch the Zoom In or Zoom Out in order to better set the camcorder display if
desired.
NOTE: The Zoom magnification is indicated on the right of the LCD screen (in between the
zoom in and zoom out icons).
3. To change the resolution, touch the resolution indicator located on the top of the LCD
screen. The resolution indicator displays the following resolution options at the bottom of
the screen:
12M 4000X3000
10M 3648X2736
8M 3264X2448
5M 2560X1920
4. Press the Shutter button or touch the center of the LCD screen to capture the photo.
The amount of photos that can be captured with the available memory appears on the top,
right corner of the LCD screen.
5. The captured photo is automatically saved to the camcorder’s Micro SD Memory card.
To Next Page
Loading...
