Vivitar DVR 787HD - Initial Camcorder Setup; Charging the Battery; Installing the Micro SD Memory Card

5
Initial Camcorder Setup
Charging the Battery
Installing the Micro SD Memory Card
To Charge the Built-in Lithium Battery:
 Use the supplied USB cable to connect
the camcorder to the computer’s USB
port or to the AC Adapter (and then to
an available electric wall socket).
 The charge light will turn off when the
battery is fully charged.
 Class 4 or higher Micro SD Memory
card (up to 32GB) needed for normal
use. Micro SD Memory Card not
included.
Using the Camcorder