Camera Options: Flash LED Lights, Macro
LED Flash Option
To increase the lighting in dark situations while capturing videos and photos, press the SET button
to activate the 2 LED Flash Lights on the front of the camera below the lens.
Press the SET button again to turn the LED Flash Lights off.
Macro Switch Option /
Your camera contains a Macro Switch that allows you to manually enable or disable the Macro mode
on your camera. While using the Macro mode, you can capture images at close range (30 ~ 45 cm).
MACRO MODE ON:
To turn the Macro mode ON, slide the Macro Switch on the side of your camera DOWN to the flower
icon .
When enabled, the Macro mode will allow your camera to focus on an object that is close to the
camera.
The flower icon will appear on the LCD and indicates that the Macro mode is ON.
MACRO MODE OFF:
To turn the Macro mode OFF slide the Macro Switch on the side of the camera UP to the mountain
icon.
The mountain icon will appear on the LCD display.
When Macro mode is off, images can be captured from 1.5m - ∞ (infinity).
Note: The Macro mode must be turned OFF when you want to use the following features:
Flash, Face Detect, and Smile Capture.
Not all cameras included these features. Refer to the „Camera Specifications‟ section to view the
features included with this camera.
To Next Page
Loading...
