EasyManuals Logo

Vivitar INTRIGUE MUZ4002 User Manual

Vivitar INTRIGUE MUZ4002
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Specifications
Charging
Bluetooth Pairing
Using Your Headphones
Bluetooth Range: Up to 33 feet (10 meters)
Battery Type: Polymer Lithium Ion Battery
Charging Input: DC 5V
Play Time: Approximately 5 hours*
*Applicable at 50% of maximum volume. Results will be lower when
volume is higher.
Play/Pause/Answer
Charging Port
Volume +/Next Track Volume -/Last Track
LED Indicator
1. The included USB charging cable has
a Micro USB plug and a standard USB
plug.
2. Insert the USB charging cable’s Micro
USB plug into the charging port on your
headphones.
3. Insert the USB charging cable’s standard
USB plug into the USB port of a computer or
suitable USB charging adapter.
4. The LED indicator light turns red while the
headphones are charging then turns off once
charging is complete.
1. Press and hold the power button to power on
your headphones.
Micro USB
Plug
USB
Plug
(red) = Charging
(off) = Charging Complete
2-3 SEC
PRESS & HOLD
1.
Press the Play/Pause Button to play a track.
Press it again to pause a track.
MUZ4002
The Bluetooth® word mark and
logos are registered trademarks
owned by the Bluetooth SIG, Inc.
and any use of such marks by Sakar
International is under license. Other
trademarks and trade names are
those of their respective owners.
A Quick Look
USER’S MANUAL I MUZ4002
2. The LED indicator light will alternately flash red and
blue to indicate that your headphones are in pairing mode.
2. Tap the next or previous track buttons to go
to the next or last track in a playlist.
3. Press and hold the volume + or volume -
buttons to increase or decrease the volume..
3. Press the answer button to answer an incoming phone call. Press it again to
end the call. Press and hold the answer button to reject a call.
3. Go to the Bluetooth settings menu on your phone. Make
sure that Bluetooth is turned on. Connect to “MUZ4002.”
4. The LED indicator light will remain blue to indicate that your
headphones are paired with your phone. Note that the light
will blink slowly anytime music is playing.
Pairing Mode
Blue & Red Flashing LED
Paired
Blue
-
+

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivitar INTRIGUE MUZ4002 and is the answer not in the manual?

Vivitar INTRIGUE MUZ4002 Specifications

General IconGeneral
Driver Size40mm
Frequency Response20Hz - 20kHz
Impedance32 Ohms
Connector3.5mm
ColorBlack
Cable Length1.2m
Ear CouplingCircumaural

Related product manuals