Vivitar V40045BT User Manual

Earphones
®
Bluetooth
V40045BT I USER’S MANUAL
Specifications
Charging
Bluetooth Pairing
Using Your Earphones
A Quick Look
Bluetooth Specification: JL5.0
Bluetooth Range: Up to 33 feet (10 meters)
Battery Type: 55mAh, 3.7V, Polymer Lithium Ion Battery
Charge Time: Approximately 2 Hours
Play Time: Approximately 3 hours*
*Applicable at 50% of maximum volume. Results will be
lower when volume is higher.
Charging Port
Microphone
Power/Play/Pause/Answer/Voice Assistant
LED Indicator Light
1. The included USB charging cable has
a Micro USB plug and a standard USB
plug.
2. Insert the USB charging cable’s Micro
USB plug into the charging port on your
earphones.
3. Insert the USB charging cable’s standard
USB plug into the USB port of a computer or
suitable USB charging adapter.
4. The LED indicator light turns red while the
earphones are charging then turns off once
charging is complete.
1. Press and hold the power button to
power on your earphones.
2. The LED indicator lights will alternately
flash red and blue to indicate that your
earphones are in pairing mode.
3. Go to the Bluetooth settings menu on your
phone. Make sure that Bluetooth is turned on.
Connect to the device listed as “V40045BT.”
4. The LED indicator lights will slowly flash blue to
indicate that your earphones are paired with
your phone.
Micro USB
Plug
USB
Plug
(red) = Charging
PLAY/PAUSE ANSWER
(off) = Charging Complete
2-3 SEC
PRESS & HOLD
1. Press and hold the power button to
power on or power off your earphones.
2.Press the PLAY/PAUSE button to play
or pause a track.
3. Press the ANSWER button to answer or end
a phone call. Press and hold the ANSWER
button to reject a phone call.
4. Quickly tap the VOICE ASSISTANT button
twice to activate Siri or Google Voice Assistant.
Pairing Mode
Red & Blue Flashing LED
Paired
Blue Slowly Flashing LED
V40045BT
The Bluetooth® word mark and
logos are registered trademarks
owned by the Bluetooth SIG, Inc.
and any use of such marks by Sakar
International is under license. Other
trademarks and trade names are
those of their respective owners.
-
+
-
+
-
+
-
+
-
+
-
+
Last Track/Volume -
Next Track/Volume +
2-3 SEC
PRESS & HOLD
-
+
-
+
-
+
VOICE ASSISTANT
-
+

Vivitar V40045BT Specifications

General

Type	Over-ear
Bluetooth Version	5.0
Battery Life	Up to 20 hours
Charging Time	2 hours
Driver Size	40 mm
Frequency Response	20 Hz - 20 kHz
Impedance	32 ohms
Microphone	Yes
Foldable	Yes
Sensitivity	105 dB

Summary

Specifications

Charging

Charging Process

Details the steps for charging the earphones using the included USB cable and a power source.

Bluetooth Pairing

Pairing Mode

Describes the red and blue flashing LED indicator for pairing mode.

Connecting to Device

Instructs users to enable Bluetooth on their phone and connect to 'V40045BT'.

Paired Status

Indicates that slowly flashing blue LEDs signify a successful pairing with the phone.

Using Your Earphones

Power On/Off

Press and hold the power button for 2-3 seconds to power the earphones on or off.

Play/Pause Music

Press the PLAY/PAUSE button to play or pause a track.

Answering Calls

Press the ANSWER button to answer/end calls or hold to reject.

Voice Assistant

Double-tap the VOICE ASSISTANT button to activate Siri or Google Voice Assistant.

Important Safety Precautions

Vivitar One Year Warranty

Controlling Music

Next Track

Tap the Next Track Button to advance to the next track in a playlist.

Last Track

Tap the Last Track Button to return to the last track in a playlist.

Volume Up

Press and hold the Volume + Button to increase the volume.

Volume Down

Press and hold the Volume - Button to decrease the volume.

FCC Statement