Vivo BEE-V004E - Safety and Preparation; Important Safety Requirements; Initial Preparation Steps

2
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualied technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not
exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
WARNING: IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY REQUIREMENTS
PREPARATION
1. Aer carefully removing the machine from the packing carton, remove
all protective lm and clean the honey extractor thoroughly with mild
soap and water BEFORE rst use.
2. The honey extractor should be placed on a dry, at stable surface.
KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
CAUTION: SHARP EDGES
PACKAGE CONTENTS
A (x1)
Drum
B (x3)
Leg
C (x2)
Lid
D (x1)
Honey Gate
E (x1)
Power Cable
S-A (x3)
M8 Plastic
Knob
S-B (x3)
M8 Washer
S-E (x3)
Concrete
Anchor
S-C (x8)
M4x12 Screw
S-D (x8)
M4 Nut
TOOLS NEEDED
Phillips
Screwdriver
Adjustable
Wrench
NOTE: Not all hardware will be used.
T-A (x1)
3mm Allen
Wrench