1
Reset button
Microphone
Lens
Lens retention screw
MicroSD card
slot
Status LED
FD8156/8168
Quick Installation Guide
Before you begin:
You can connect the
Ethernet cable to a PC or
laptop for a live view. (See
page 5). Raise the camera
to the estimated position,
and evaluate the eld of
view by turning the mount
bracket and lens.
Shooting
direction
Loosen the retention screw
to change shooting angle.
1. The camera can only be powered by Power
over Ethernet (PoE).
2. The camera can only be installed in an
indoor environment.
NOTE:
Part no.: 625024500G
To Next Page
Need help?
General
