Need help?Do you have a question about the Vivotek FD8162 and is the answer not in the manual?
Steps to access the camera via web browser, including ActiveX control and plug-in setup.
Detailed steps for manually fine-tuning the camera's focus using the dedicated assist button and indicator.
Configuration of system parameters including host name, system time, and general settings.
Procedures for upgrading firmware, rebooting the camera, and restoring factory default settings.
Securing access by setting root passwords, managing user accounts, and defining privileges.
Enabling secure data transmission over the internet by configuring HTTPS and SSL certificates.
Configuring network connection types (LAN, PPPoE) and IP address settings for optimal connectivity.
Fine-tuning image settings including brightness, contrast, sharpness, white balance, and day/night modes.
Setting up multiple video streams, defining regions of interest, and configuring output frame sizes for different viewing requirements.
Defining events based on triggers like motion detection, digital input, or tampering, and configuring actions.
Setting up motion detection zones, sensitivity, and percentage thresholds for event triggers.
Steps to access the camera via web browser, including ActiveX control and plug-in setup.
Detailed steps for manually fine-tuning the camera's focus using the dedicated assist button and indicator.
Configuration of system parameters including host name, system time, and general settings.
Procedures for upgrading firmware, rebooting the camera, and restoring factory default settings.
Securing access by setting root passwords, managing user accounts, and defining privileges.
Enabling secure data transmission over the internet by configuring HTTPS and SSL certificates.
Configuring network connection types (LAN, PPPoE) and IP address settings for optimal connectivity.
Fine-tuning image settings including brightness, contrast, sharpness, white balance, and day/night modes.
Setting up multiple video streams, defining regions of interest, and configuring output frame sizes for different viewing requirements.
Defining events based on triggers like motion detection, digital input, or tampering, and configuring actions.
Setting up motion detection zones, sensitivity, and percentage thresholds for event triggers.
General| Camera Type | Fixed Dome |
|---|---|
| Max Resolution | 1920 x 1080 |
| Image Sensor | 1/2.7" Progressive CMOS |
| Lens Type | Fixed |
| Lens Focal Length | 2.8 mm |
| Video Compression | H.264, MJPEG |
| Day/Night Functionality | Yes |
| IR Cut Filter | Yes |
| ONVIF | Yes |
| Ingress Protection | IP66 |
| Frame Rate | 30 fps |
| Power Supply | IEEE 802.3af PoE |
| Operating Temperature | -10°C to 50°C |
| Network Interface | 10/100Base-TX Ethernet |
To Next Page
