Vivotek FD8162 - HTTPS Secure Communication

VIVOTEK
User's Manual - 41
Security > HTTPS (Hypertext Transfer Protocol over SSL)
This section explains how to enable authentication and encrypted communication over SSL
(Secure Socket Layer)� It helps protect streaming data transmission over the Internet on higher
security level�
Create and Install Certicate Method
Before using HTTPS for communication with the Network Camera, a Certicate must be created rst.
There are three ways to create and install a certicate:
Create self-signed certificate automatically
1. Select the rst option.
2� Check Enable HTTPS secure connection, then select a connection option: “HTTP & HTTPS” or
“HTTPS only”�
3� Click Save to generate a certicate.
4. The Certicate Information will automatically be displayed in the third column as shown below. You can
click Property to view detailed information about the certicate.
Advanced Mode