Vivotek FD8162 - Video Input

VIVOTEK
User's Manual - 129
7.6.9 RTP port
Subgroup of network: rtp
NAME VALUE SECURITY
(get/set)
DESCRIPTION
videoport 1025 ~ 65535 6/6 Video channel port for RTP.
(capability.protocol.rtp_unicast=1)
audioport 1025 ~ 65535 6/6 Audio channel port for RTP.
(capability.protocol.rtp_unicast=1)
7.6.10 PPPoE
Subgroup of network: pppoe (capability.protocol.pppoe > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
user string[128] 6/6 PPPoE account user name.
pass password[64] 6/6 PPPoE account password.
7.7 IP Filter
Group: ipfilter
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable access list filtering.
admin_enable <boolean> 6/6 Enable administrator IP address.
admin_ip String[44] 6/6 Administrator IP address.
maxconnection 1~10 6/6 Maximum number of concurrent streaming
connection(s).
type 0, 1 6/6 Ipfilter policy :
0 => allow
1 => deny
ipv4list_i<0~9> Single address:
<ip address>
Network address:
<ip address /
network mask>
Range
address:<start ip
address - end ip
6/6 IPv4 address list.
address>
ipv6list_i<0~9> String[44] 6/6 IPv6 address list.
7.8 Video input
Group: videoin
NAME VALUE SECURITY
(get/set)
DESCRIPTION
cmosfreq 50, 60 4/4 CMOS frequency.
(capability.videoin.type=2)
whitebalance auto, manual 4/4 “auto” indicates auto white balance.
“manual” indicates keep current value.
exposurelevel 0~12 4/4 Exposure level
autoiris <boolean> 4/4 Enable auto Iris. (not used in FD8162)
irismode fixed, indoor,
outdoor
4/4 Video Iris for DC Iris.
enablewdr <boolean> 4/4 Enable/disable wield dynamic range. (not used in
FD8162)
enableblc <boolean> 4/4 Enable backlight compensation.
agc 0,1,2 4/4 Set auto gain control to normal level or MAX level.
0->2x,
1->4x,
2->8x
(not used in FD8162)
color 0, 1 4/4 0 =>monochrome
1 => color
flip <boolean> 4/4 Flip the image.
mirror <boolean> 4/4 Mirror the image.
ptzstatus <integer> 1/7 A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support camera control function; 0(not
support), 1(support)
Bit 1 => Built-in or external camera; 0 (external),
1(built-in)
Bit 2 => Support pan operation; 0(not support),
1(support)
Bit 3 => Support tilt operation; 0(not support),
1(support)