Vivotek FD8162 - Event Setting

VIVOTEK
152 - User's Manual
n
image_wdrc <Boolean> 0/7 Indicate whether to support WDR enhanced.
image_ iristype <string> 0/7 Indicate iris type.
image_ focusassist <Boolean> 0/7 Indicate whether to support focus assist.
7.29 Customized event script
Group: event_customtaskfile_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[41] 6/7 Custom script identification of this entry.
date string[17] 6/7 Date of custom script.
time string[17] 6/7 Time of custom script.
7.30 Event setting
Group: event_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry.
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority
delay 1~999 6/6 Delay in seconds before detecting the next event.
trigger boot,
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
“visignal” = Video input signal loss.
“recnotify” = Recording notification.
“tampering” = Tamper detection.
“vi”= Virtual input (Manual trigger)
triggerstatus String[40] 6/6 The status for event trigger