Vivotek FD8162 User Manual

VIVOTEK
User's Manual - 151
by commas>
<product
dependent>
videoin_codec mpeg4. mjpeg,
h264
<product
dependent>
0/7 Available codec list.
videoout_codec <a list of the
available codec
types separated
by commas)
<product
dependent>
0/7 Available codec list.
audio_aec <boolean> 0/7 Indicate whether to support acoustic echo
cancellation.
audio_extmic <boolean> 0/7 Indicate whether to support external microphone
input.
audio_linein <boolean> 0/7 Indicate whether to support external line input.
(It will be replaced by audio_mic and
audio_extmic.)
audio_lineout <boolean> 0/7 Indicate whether to support line output.
audio_headphoneout <boolean> 0/7 Indicate whether to support headphone output.
audioin_codec aac4, gamr,
g711
<product
dependent>
0/7 Available codec list for audio input.
audioout_codec g711
<product
dependent>
0/7 Available codec list for SIP.
camctrl_httptunnel <boolean> 0/7 Indicate whether to support httptunnel.
(not used in FD8162)
camctrl_httptunnelcl
ient
<boolean> 0/7 Indicate whether to support httptunnel client.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage Privilege” of
PTZ control in the Security page.
1: support both /cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
(not used in FD8162)
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP tunnel for UART
transfer.
(not used in FD8162)
transmission_mode Tx,
Rx,
Both
0/7 Indicate transmission mode of the machine: TX =
server, Rx = receiver box, Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0/7 Indicate whether to support wireless 802.11b+.
wireless_s802dot11g <boolean> 0/7 Indicate whether to support wireless 802.11g.
wireless_encrypt_we
p
<boolean> 0/7 Indicate whether to support wireless WEP.
wireless_encrypt_wp
a
<boolean> 0/7 Indicate whether to support wireless WPA.
wireless_encrypt_wp
a2
<boolean> 0/7 Indicate whether to support wireless WPA2.
wireless_beginchann
el
1 ~ 14 0/7 Indicate the begin channel of wireless network
wireless_endchannel 1 ~ 14 0/7 Indicate the end channel of wireless network
derivative_brand <boolean> 0/7 Indicate whether to support the upgrade function
for the derivative brand. For example, if the value
is true, the VVTK product can be upgraded to
VVXX. (TCVV<->TCXX is excepted)
npreset 0, <positive
integer>
0/7 Number of preset locations
eptz 0, <positive
integer>
0/7 A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
nanystream 0, <positive
integer>
0/7 number of any media stream per channel
iva <boolean> 0/7 Indicate whether to support Intelligent Video
analysis
tampering <boolean> 0/7 Indicate whether to support tampering detection.
test_ac <boolean> 0/7 Indicate whether to support test ac key.
version_onvifdaemo <string> 0/7 Indicate ONVIF daemon version

Vivotek FD8162 Specifications

General

Brand	Vivotek
Model	FD8162
Category	Security Camera
Language	English