Need help?Do you have a question about the Vivotek FD8167-T and is the answer not in the manual?
General| Camera Type | Fixed Dome |
|---|---|
| Sensor Type | CMOS |
| Max Resolution | 1920x1080 |
| Lens Type | Fixed |
| Lens Focal Length | 2.8 mm |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Maximum Frame Rate | 30 fps @ 1920x1080 |
| Network Interface | RJ-45 |
| Ingress Protection | IP66 |
| Shutter Time | 1/5 sec. to 1/32, 000 sec. |
| IR Illuminators | Built-in |
| IR Range | Up to 30m |
| Minimum Illumination | 0 Lux with IR on |
| Supported Protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP, RTP, RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, Bonjour, 802.1X, ARP, ICMP, SNMP, QoS |
| Ethernet | 10/100Base-TX |
| Power Supply | PoE (IEEE 802.3af) |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Field of View | 113° (Horizontal) |
Step-by-step guide for physical installation of the FD8167 model.
Procedure for configuring the camera's IP address.
Step-by-step guide for physical installation of the FD8367 model.
Methods to view camera feed via browsers, RTSP, or software.
Access to system, media, network, and security settings.
Setting up IP, PPPoE, and streaming protocols.
Managing user accounts, HTTPS, and access lists.
Configuring camera responses to triggers like motion or digital input.
Configuring video recording schedules and sources.
To Next Page
