Vivotek FD8161 User Manual

Important safety and legal information before using the network camera.

Lists all items included in the camera package for verification.

Details the physical components and ports of the network camera.

Step-by-step guide for physically mounting the camera on ceilings or walls.

Instructions for connecting the camera to a network for internet access.

Guides the user through installing the IW2 software for network camera setup.

Details how to access the camera's live view and settings via a web browser.

Instructions for viewing the camera stream using RTSP-compatible media players.

Guide for accessing the camera stream on mobile devices using 3GPP.

How to use VIVOTEK's software for monitoring and recording multiple cameras.

Configure system settings like host name, system time, and DI/DO.

Set up password protection and manage user accounts for secure access.

Configure wired network connections, IP addresses, and protocols.

Adjust video quality, frame rates, and audio input/output settings.

Configure motion detection windows and sensitivity for event triggering.

Set up recording schedules, sources, and destinations for video clips.

Restore factory default settings and manage firmware upgrades.

Enable secure HTTP communication for enhanced data transmission security.

Configure dynamic domain name service for consistent remote access.

Set up authentication modes for RTSP streaming to secure video access.

Provides commands for controlling camera functions via URL syntax.

Lists the camera's internal hardware components and specifications.

Details network interfaces, protocols, and standards supported by the camera.

Lists supported video compression, streaming, and frame rate specifications.

Details audio compression, input/output interfaces, and supported protocols.

Compliance information regarding FCC rules for radio frequency emissions.