Vivotek FD816B-H(T) - Page 274

VIVOTEK
274 - User's Manual
The dwelling time of each patrol location
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ
operation.
defaulthome <boolean> 1/4 This field tells system to use default
home position or not.
axisx capability_ptz_minpan ~
capability_ptz_maxpan
1/4 Custom home pan position.
axisy capability_ptz_mintilt ~
capability_ptz_maxtilt
1/4 Custom home tilt position.
axisz capability_ptz_minzoom ~
capability_ptz_maxzoom
1/4 Custom home zoom position.
axisf capability_ptz_minfocus ~
capability_ptz_maxfocus
1/4 Custom home focus position.
axisflip <boolean> 1/4 Custom home flip side.
returnhome <boolean> 1/4 Enable/disable return home while idle.
returnhomeinterval 1~999 1/4 While idle over this time interval, idle
action will be taken.
digitalzoom <boolean> 1/4 Enable/disable digital zoom
idleaction_enable <boolean> 1/4 Enable/disable idle action while idle
idleaction_type pan,patrol,home,objtrack,
prev
1/4 This field tells what kind of action should
be taken while idle.
idleaction_interval 1~999 1/4 While idle over this time interval, idle
action will be taken.
horizontalalignment <boolean> 1/4 Once you enable this feature, a
reference line will be visible when the
camera tilt is under 0° or over 180° to
help verify that the camera is mounted
to a flat surface.
osdzoom <boolean> 1/4 Show zoom ratio text on video.
zoomenhance <boolean> 1/4 Enable / Disable zoom enhancement
tour_index -1, 0~19 1/4 Index of the enabled tour group, from 0
to 19.
Set -1 to disable all the tour groups.
tour_i<0~19>_name string[40] 1/4 Name of the tour.
tour_i<0~19>_type <boolean> 1/4 0 = Recorded tour
1 = Preset tour
tour_i<0~19>_speed -5 ~ 5 1/4 Preset tour: pan and tilt speed when
moving between presets.
Recorded tour: unnecessary.