Vivotek FD9366-HV - Page 164

VIVOTEK
164 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
30
VALID VALUES DESCRIPTION
<WxH> The format for resolution.
W is the pixel number of width.
H is the pixel number of height.
Ex: 1920x1080, 2048x1536
available The API is listed in product WebAPIs.
non-available The API is not in product WebAPIs.
valid The API is listed in product WebAPIs, and is functional.
non-valid The API is listed in product WebAPIs, but is malfunction in this status.
<decimal> Any decimal number expressed in 32-bits ranging from
1.18e-38~3.40e+38.
NOTE: The camera should not be restarted when parameters are changed.
7.1System
Group: system
NAME VALUE SECURITY
(get/set)
DESCRIPTION
hostname string[64] 1/6 Host name of server
(Network Camera,
Wireless Network Camera,
Video Server,
Wireless Video Server).
ledoff <boolean> 6/6 Turn on (0) or turn off (1) all led
indicators.
date <YYYY/MM/DD
>,
keep,
auto
6/6 Current date of system. Set to ‘keep’ to
keep date unchanged. Set to ‘auto’ to
use NTP to synchronize date.
time <hh:mm:ss>,
keep,
auto
6/6 Current time of the system. Set to ‘keep’
to keep time unchanged. Set to ‘auto’ to
use NTP to synchronize time.
datetime <MMDDhhmm
YYYY.ss>
6/6 Another current time format of the
system.
ntp <domain
name>,
<ip address>,
6/6 NTP server.
*Do not use “skip to invoke default
server” for default value.