Vivotek FD9366-HV - Page 177

VIVOTEK
User's Manual - 177
© 2019 VIVOTEK INC. All Right Reserved
42
7.6.5 HTTP
Subgroup of network: http
NAME VALUE SECURITY
(get/set)
DESCRIPTION
port 80, 1025 ~
65535
1/6 HTTP port.
alternateport 1025~65535 6/6 Alternate HTTP port.
authmode basic,
digest
1/6 HTTP authentication mode.
s<0~(capability_nmed
iastream-1)>_accessn
ame
<product dependent>
<Not recommended
to use this>
string[32] 1/6 Http server push access name for stream
N, N= 1~ capability_nmediastream.
(capability_protocol_spush_mjpeg =1
and capability_nmediastream > 0)
The value are shown as
video1s1.mjpg = c0_s0_accessname,
(channel1stream1)
video1s2.mjpg = c0_s1_accessname,
(channel1stream2)
video1s3.mjpg = c0_s2_accessname,
(channel1stream3)
video1s4.mjpg = c0_s3_accessname,
(channel1stream4)
etc.
* We replace this parameter with
"network_http_c<0~(capability_nvideoin
-1)>_s<0~(capability_nmediastream-1)>_
accessname
" when the version number (httpversion)
is equal or greater than 0311c.
anonymousviewing <boolean> 1/6 Enable anonymous streaming viewing.
7.6.6 HTTP per Channel
Subgroup of network: http_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin"
© 2019 VIVOTEK INC. All Right Reserved
43
NAME VALUE SECURITY
(get/set)
DESCRIPTION
s<0~(capability_nmedia
stream-1)>_accessname
<product dependent>
string[32] 1/6 Http server push access name for
channel N and stream M, N= 1~
capability_nvideoin, M= 1~
capability_nmediastream.
(capability_protocol_spush_mjpeg =1
and capability_nmediastream > 0)
The value are shown as
video1s1.mjpg = c0_s0_accessname,
(channel1stream1)
video1s2.mjpg = c0_s1_accessname,
(channel1stream2)
video2s1.mjpg = c1_s0_accessname,
(channel2stream1)
video2s2.mjpg = c1_s1_accessname,
(channel2stream2)
etc.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0311c.
7.6.7 HTTS Port
Subgroup of network: https (capability_protocol_https > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
port 443, 1025 ~
65535
1/6 HTTPS port.