Vivotek FD9366-HV - Page 217

VIVOTEK
User's Manual - 217
© 2019 VIVOTEK INC. All Right Reserved
82
7.9Time Shift Settings
Group: timeshift for n channel products and m stream
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
(capability_timeshift > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable time shift streaming.
c<0~(n-1)>_s<
0~(m-1)>_allo
w
<boolean> 4/4 Enable time shift streaming for
specific stream.
7.10 IR Cut Control
Group: ircutcontrol (capability_daynight_c<0~(n-1)>_support > 0)
n denotes the value of "capability_nvideoin"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule…etc
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_mode"
<product dependent>
6/6 Set IR cut control mode
sir
<product
dependent>
<boolean> 6/6 Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_
nvideoin"-1>_smartir" is 1
daymodebegintime 00:00~23:59 6/6 Day mode begin time
daymodeendtime 00:00~23:59 6/6 Day mod end time
© 2019 VIVOTEK INC. All Right Reserved
83
NAME VALUE SECURITY
(get/set)
DESCRIPTION
disableirled <boolean> 6/6 Enable/disable built-in IR led
* Only available when
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinir > 0
enableextled <boolean> 1/6 Enable/disable external IR led
* Only available when
capability_daynight_c<0~"capability_
nvideoin"-1>_externalir > 0
enablewled <boolean> 6/6 Enable/disable built-in White led
* Only available when
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinwled > 0
bwmode <boolean> 6/6 Switch to B/W in night mode if
enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
blackwhitemode" is 1.
sensitivity low,normal,high,1~10
0
6/6 Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=options
"1~100": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=normalize
* Only available when
"capability_daynight_c<0~(n-1)>
_ircutsensitivity_type" is not "-".
spectrum_mode visible,
ir,
irenhanced,
blueenhanced
<product dependent>
6/6 Set spectrum method .
* Only available when
"capability_daynight_c<0~(n-1)>_spec
trum_support" is 1.