Vivotek FD9366-HV - Page 223

VIVOTEK
User's Manual - 223
© 2019 VIVOTEK INC. All Right Reserved
88
NAME VALUE SECURITY
(get/set)
DESCRIPTION
<product
dependent>
* Only available when 'dis' is listed in
"capability_image_c<0~(n-1)>_is_mod
e".
scene_mode
<product
dependent>
Av) 4/4 Value of scene mode
* Only available when
"capability_image_c<0~(n-1)>_scene
mode_support" is 1
restoreatwb
<positive integer>
4/4 Restore of adjusting white balance of
image according to mode settings
freeze
<product
dependent>
<boolean> 4/4 Enable/disable Image freeze while
patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_freeze"
is 1
deinterlace_enable <boolean> 4/4 Enable/disable deinterlace function.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_deinter
lace_support" is 1.
deinterlace_mode spatial,blend 4/4 Users can choose between two
different deinterlacing techniques:
Spatical mode provides the best
image quality, while Blend mode
provides better image quality (than
not using the deinterlace function at
all).
* Only available when
"capability_image_c<0~(n-1)>_deinter
lace_support" is 1.
xoffset 0~100 4/4 Adjusting the image to proper
position horizontally.
* Only available when the bit 4 of
capability_image_c<0~(n-1)>_basicset
© 2019 VIVOTEK INC. All Right Reserved
89
NAME VALUE SECURITY
(get/set)
DESCRIPTION
ting is 1.
yoffset 0~100 4/4 Adjusting the image to proper
position vertically.
* Only available when the bit 5 of
capability_image_c<0~(n-1)>_basicset
ting is 1.
lens_alignment 0~100 4/4 Stitch the sensors together into
focused position.
* Only available when
"capability_image_c<0~(n-1)>_lens_al
ignment" is 1.
lens_ldc_mode <boolean> 4/4 Enable/disable lens distortion
correction.
* Only available when
"capability_image_c<0~(n-1)>_lens_ld
c_support" is 1.
palette_mode Available value is
listed in
"capability_image_c<
0~(n-1)>_palette_mo
de"
1/4 Set color palette option.
* Only available when
"capability_image_c<0~(n-1)>_palette
_support" is 1.
* Not support "policy=day" anymore
when the version number
(httpversion) is equal or greater than
0310a.
profile_i<0~(m-1)>
_enable
<boolean> 4/4 Enable/disable this profile setting
profile_i<0~(m-1)>
_policy
night,
schedule
4/4 The mode which the profile is applied
to.
* Not support "policy=day" anymore
when the version number
(httpversion) is equal or greater than
0301a.
profile_i<0~(m-1)> hh:mm 4/4 Begin time of schedule mode.