Vivotek FD9366-HV - Page 258

VIVOTEK
258 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
124
NAME VALUE SECURITY
(get/set)
DESCRIPTION
protocol_qos_cos <boolean> 0/7 Indicate whether to support CoS.
protocol_qos_dscp <boolean> 0/7 Indicate whether to support
QoS/DSCP.
protocol_ddns <boolean> 0/7 Indicate whether to support DDNS.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_nresolutio
n
<positive integer> 0/7 This equals
"capability_videoin_c0_nresolution".
* This is kept for compatibility.
videoin_resolution A list of <WxH>
<product dependent>
0/7 This equals
"capability_videoin_c0_resolution".
* This is kept for compatibility.
videoin_maxframer
ate
A list of <Integer> 0/7 This equals
"capability_videoin_c0_maxframerate
".
* This is kept for compatibility.
videoin_mjpeg_ma
xframerate
A list of <Integer> and
"-"
0/7 This equals
"capability_videoin_c0_mjpeg_maxfra
merate".
* This is kept for compatibility.
videoin_h264_max
framerate
A list of <Integer> and
"-"
0/7 This equals
"capability_videoin_c0_h264_maxfra
merate".
* This is kept for compatibility.
videoin_codec mjpeg, h264, h265
<product dependent>
0/7 Available codec of a device, split by
comma.
The sequence is not limited.
EX:
FD8183 supports H.264 and MJPEG,
then this is "mjpeg,h264".
IP9171 supports H.264, MJPEG and
H.265, then this is "mjpeg,h264,h265"
videoin_streamcod A list of <Positive 0/7 This equals