Vivotek FD9366-HV - Page 290

VIVOTEK
290 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
156
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
maxfps_h264 A list of <Positive
Integer> and "-"
0/7 Maximum fps which the device can
encoded with H.264 on resolutions in this
video mode.
"-" means not support.
* One to one mapping to the resolution
in "resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter records the frame rate
when
"videoin_c<0~(n-1)>_cmosfreq"=60 or
"videoin_c<0~(n-1)>_modulation"=ntsc
* Only available when 'h264' is listed in
"capability_videoin_codec".
maxfps_h265 A list of <Positive
Integer> and "-"
0/7 Maximum fps which the device can
encoded with H.265 on resolutions in this
video mode.
"-" means not support.
* One to one mapping to the resolution
in "resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter records the frame rate
when
"videoin_c<0~(n-1)>_cmosfreq"=60 or
"videoin_c<0~(n-1)>_modulation"=ntsc
* Only available when 'h265' is listed in
"capability_videoin_codec".
description <string[128]> 0/7 Description about this mode.
Group: capability_image_c<0~(n-1)> n denotes the value of "capability_nvideoin"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
basicsetting 0, <positive
integer>
0/7 A 32-bits integer, each bit can be set
separately as follows:
Bit 0 => Supports Brightness or not.