Vivotek FD9366-HV - Page 297

VIVOTEK
User's Manual - 297
© 2019 VIVOTEK INC. All Right Reserved
162
NAME VALUE SECURITY
(get/set)
DESCRIPTION
- (enabled) : UI is checked.
- (notsupport) : the affected function
is not available.
"Affect API name" can be described in
hierarchy, such as
"exposurewin.mode.blc: disabled:"
which means blc exposure window is
disabled. API name can be one word
as well, such as
"exposurelevel:fixed:6" which means
exposurelevel is fixed to level 6.
"Description" can be a nonnegative
integer or string or NULL.
"-" means no feature is affected.
* Only available when
"capability_image_c<0~(n-1)>_is_mod
e" is not "-".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
scenemode_support 0,1 0/7 0: Non-support scene mode
1: Support scene mode
scenemode_supportty
pe
<product dependent>
visibility,
noiseless,
lpcparkinglot,
lpcstreet,
lpchighway,
auto,
deblur,
lpcfreeway
<product
dependent>
0/7 list all the scene mode which are
supported in the camera.
* Only available when
"capability_image_c<0~(n-1)>_
scenemode_support" is 1
wbmode auto,
panorama,
manual,
rbgain,
0/7 Available white balance mode.
"-" means white balance is not
supported.
© 2019 VIVOTEK INC. All Right Reserved
163
NAME VALUE SECURITY
(get/set)
DESCRIPTION
widerange,
outdoor,indoor,
sodiumauto,
-
<product
dependent>
iristype piris,
dciris,
-
0/7 Indicate iris type.
"piris": P-Iris
"dciris": DC-Iris
"-": No Iris control support
* Note: For some cameras, this value
may be varied depending on mounted
lens.
sensortype rawsensor,
smartsensor,
thermalsensor,
-
0/7 Indicate sensor type.
"rawsensor": Raw sensor
"smartsensor": Smart sensor
"thermalsensor": Thermal sensor
"-": N/A
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_mode 0,1 0/7 0: Non-support exposure control.
1: Support exposure control.
exposure_modetype auto,
shutterpriority,
irispriority,
manual
<product
dependent>
0/7 Available mode of exposure setting.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_rangetype onevalue,
twovalues
0/7 Support interface of exposure range.
"onevalue": The parameter is a
constant value.
"twovalues": Need two parameters to
indicate the exposure range.
* Only available when