Vivotek FD9366-HV - Page 321

VIVOTEK
User's Manual - 321
© 2019 VIVOTEK INC. All Right Reserved
186
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
action_server_i<0~4>_m
edia
NULL, 0~4,101 6/6 Index of the attached media.
101 means "Recording Notify"
action_server_i<0~4>_da
tefolder
<boolean> 6/6 Enable this to create folders by date,
time, and hour automatically.
action_goto_enable
<product dependent>
<boolean> 6/6 Enable/disable ptz goto preset position
on event triggered.
* Only available when
"capability_ptzenabled" > 0.
action_goto_name
<product dependent>
string[40] 6/6 Specify the preset name that ptz goto on
event triggered.
* Only available when
"capability_ptzenabled" > 0.
action_goto_sync
<product dependent>
<boolean> 6/6 Capture media after moving to the
location.
* Only avaliable when the bit4 of
capability_ptzenabled is 1 and the bit7 of
capability_ptzenabled is 0, or
capability_camctrl_c0_zoommodule > 0
action_autotrack_enable
<product dependent>
<boolean> 6/6 Enable/disable auto tracking on event
triggerd.
* Only avaliable when the bit4 of
capability_ptzenabled is 1 and the bit7 of
capability_ptzenabled is 0
action_audioclip_enable <boolean> 6/6 Enable/disable the function the play an
audio clip when an event is triggered.
* Only avaliable when
"capability_audio_audioclip" is 1.
action_audioclip_media 0,<positive
integer>
6/6 Indicate the source id of audioclip event
notification.
* Only avaliable when
"capability_audio_audioclip" is 1.
© 2019 VIVOTEK INC. All Right Reserved
187
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
tampering 0,<positive
integer>
6/6 Indicate the source channel id of
tampering detection.
A 4-bit integer, each bit represents each
channel.
bit 0 => tampering detection for first
channel.
bit 1
=> tampering detection for second
channel.
bit 2 => tampering detection for third
channel.
bit 3 => tampering detection for fourth
channel.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0311c.
7.30 Server Setting for Event Action
Group: server_i<0~4>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry
type email,
ftp,
http,
ns
6/6 Indicate the server type:
“email” = email server
“ftp” = FTP server
“http” = HTTP server
“ns” = network storage
http_url string[128] 6/6 URL of the HTTP server to upload.
http_username string[64] 6/6 Username to log in to the server.
http_passwd string[64] 7/6 Password of the user.
ftp_address string[128] 6/6 FTP server address.
ftp_username string[64] 6/6 Username to log in to the server.
ftp_passwd string[64] 7/6 Password of the user.
ftp_port 0~65535 6/6 Port to connect to the server.