Vivotek FD9381-EHTV - Page 175

VIVOTEK
User's Manual - 175
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
vbr
s<0~(m-1)>_h
265_cbr_quant
1~5, 100 4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"cbr_qpercent"
* Only available when h265 is listed in
"capability_videoin_codec" and
"ratecontrolmode"= cbr.
* Only available when
"capability_smartstream_version"="2
.0"
s<0~(m-1)>_h
265_cbr_qperce
nt
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
cbr and "quant"= 100.
* Only available when
"capability_smartstream_version"="2
.0"
s<0~(m-1)>_h
265_bitrate
20000~"capability_videoin_c<n>_h2
65_maxbitrate"
4/4 The target bit rate in constant bit rate
mode.
* Only available when h265 is listed in
"capability_videoin_codec".
*Only valid when "ratecontrolmode"=
cbr

s<0~(m-1)>_h framerate,imagequality 4/4 Set prioritypolicy