Vivotek FD9381-EHTV - Page 255

VIVOTEK
User's Manual - 255
"capability_image_c<n>_
exposure_mode" is 1.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
exposure_levelrange -,
"0,12"
0/7 Available range for
"videoin_c<n>_exposurelevel"
* When "exposure_mode"=0, this
must be set to "-".
exposure_winmode auto,
custom,
blc,
-
<product dependent>
0/7 Available options for
"exposurewin_c<n>_mode"
* "-" means group: exposurewin is not
supported.
* When exposure_mode="0", this
must be set to "-".
exposure_wintype inclusive,
exclusive,
-
0/7 The supported exposure window type.
inclusive: The image inside a window is
the target area of exposure control.
exclusive: The image inside a window
is omitted by exposure control.
-: Not supported.
exposure_windomain qvga, px, std, - 0/7 The domain to set an exposure
window.
qvga: a 320x240 range to represent
the whole image.
px: Locate a window in the image with
pixels.
std: A normalized 0~9999 range.
-: Not supported.
exposure_winnum 0, <Positive Integer> 0/7 Indicate the number of custom
exposure windows.
* If no " custom" is listed in
"exposure_winmode", this should be
0.
exposure_ntsc_totalrange
Alistof<PositiveInteger>
0/7 Available total range for NTSC analog
output
*Onlyavailablewhen[httpversion]>=