Vivotek FD9381-EHTV - Page 276

VIVOTEK
276 - User's Manual
storage size.
number string[128] 6/7 This number is used to register license key for
VADP application.
Group: vadp_module_i<0~(n-1)> for n VADP package number (capability_vadp_npackage > 0)
n denotes the value of "capability_vadp_npackage".
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Indicate if the module is enabled or not.
If yes, also add the index of this module to the
module_order.
name string[40] 6/6 Module name
extendedname string[40] 6/6 Extended module name. If this value is not
blank, it will be shown on the VADP UI first
instead of vadp_module_i<n>_name.
url string[120] 6/6 Define the URL string after the IP address if the
module provides it own web page.
vendor string[40] 6/6 The provider of the module.
vendorurl string[120] 6/6 URL of the vendor.
version string[40] 6/6 Version of the module.
license string[40] 6/6 Indicate the license status of the module.
licmsg string[128] 6/6 Indicate the message that will be show on
license status when mouse over.
path string[40] 6/6 Record the storage path of the module.
initscr string[40] 6/6 The script that will handle operation
commands from the system.
status string[40] 6/6 Indicate the running status of the module.
statmsg string[128] 6/6 Indicate the message that will be show on the
running status when mouse over.
vvtklicensemec string[40] 6/7 Indicate the module use VIVOTEK license
mechanism
Group: vadp_schedule_i<0~(n-1)> for n VADP package number
n denotes the value of "capability_vadp_npackage".
(Only available when capability_vadp_npackage > 0 and the version number of "vadp_version" is equal or greater
than 1.3.2.0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the schedule mode to