Vivotek IB8369 - Page 133

VIVOTEK
User's Manual - 133
18
user_i<1~20>_pass password[64] <blank> 7/6 User password
user_i0_privilege admin admin 6/7 Root privilege
user_i<1~20>_
privilege
view,
operator,
admin
<blank> 6/6 User privilege
7.4 network
Group: network
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
preprocess <positive
integer>
NULL 6/6 An 32-bit integer, each bit can be set separately as
follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming
service;
To stop service before changing its port settings.
It’s recommended to set this parameter when
change a service port to the port occupied by
another service currently. Otherwise, the service
may fail.
Stopped service will auto-start after changing port
settings.
Ex:
Change HTTP port from 80 to 5556, and change
RTP port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=5556
& network_rtp_videoport=20480”
type lan,
pppoe
lan 6/6 Network connection type.
resetip <boolean> 0 6/6 1 => Get ipaddress, subnet, router, dns1, dns2
from DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1,
and dns2.