Vivotek IP7161 - Page 138

VIVOTEK
138 - User's Manual
ftp_passive 0, 1 6/6 To enable or disable the passive mode.
0 is to disable the passive mode.
1 is to enable the passive mode.
email_address string[128] 6/6 The email server address
email_sslmode <boolean> 6/6 To enable or disable the SSL mode
0 is to disable the SSL mode
1 is to enable the SSL mode
email_username string[64] 6/6 The username to login in the server.
email_httpsmode 0, 1 6/6 Enable support SSL
email_port 0~65535 6/6 The port to connect the server.
email_passwd string[64] 6/6 The password of the user.
email_senderemail string[128] 6/6 The email address of sender.
email_recipientemail string[128] 6/6 The email address of recipient.
ns_location string[128] 6/6 The location to upload or store the media.
ns_username string[64] 6/6 The username to login in the server.
ns_passwd string[64] 6/6 The password of the user.
ns_workgroup string[64] 6/6 The workgroup for network storage.
Group: media_i<0~4>(media_freespace is used internally.)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 The identification of this entry
type snapshot,
systemlog
videoclip
6/6
T
he media type to send to the server or store by
the server.
snapshot_source <integer> 6/6 Indicate the source of media stream.
0 means the first stream.
1 means the second stream and etc.
2 means the third stream and etc.
3 means the fourth stream and etc.
snapshot_prefix string[16] 6/6 Indicate the prefix of the filename.
snapshot_datesuffix 0, 1 6/6 To add date and time suffix to filename or not.
1 means to add date and time suffix.
0 means not to add it.
snapshot_preevent 0 ~ 7 6/6 It indicates the number of pre-event images.