What to do if Vivotek Security Camera system problems remain after reset?
If you continue to experience system problems with your Vivotek Security Camera even after performing a reset, try restoring the factory settings and then reinstalling the camera.
General| Sensor Type | CMOS |
|---|---|
| Maximum Resolution | 640 x 480 |
| Lens Type | Fixed |
| Aperture | F2.0 |
| Day/Night | Yes |
| Pan/Tilt/Zoom | No |
| Maximum Frame Rate | 30 fps |
| Frame Rate | 30 fps |
| Ethernet Ports | 1 |
| Dimensions | 60 mm (D) x 60 mm (W) x 115 mm (H) |
| Weight | 160 g |
| Focal Length | 4.0 mm |
| Shutter Time | 1/5 sec ~ 1/10000 sec |
| Video Compression | MPEG-4, MJPEG |
| Audio Capability | Yes |
| Network Interface | 10/100 Base-T Ethernet |
| Power over Ethernet | Yes |
| Protocols | HTTP, HTTPS, TCP/IP, UDP, SMTP, FTP, DHCP, DNS, DDNS, NTP, RTSP, RTP, RTCP, IGMP |
| Security | Password protection, IP filtering |
| Connectors | RJ-45 |
| Power Supply | DC 12V |
| Operating Temperature | -10°C ~ 50°C |
Physical installation steps for the network camera and its accessories.
Instructions for installing camera software using the provided Installation Wizard.
Configuration of network parameters including IP address, subnet mask, gateway, and DNS.
Implementing an administrator password for enhanced security and preventing unauthorized access.
Procedure for authenticating access to the network camera through a web browser.
Adjusting camera settings to achieve optimal performance and image quality.
Securing the network camera by establishing administrator and user account passwords.
Configuration of network connection type (LAN/PPPoE) and IP address settings.
Guidance on diagnosing and resolving common operational issues and understanding system status indicators.
To Next Page
