Need help?Do you have a question about the Vivotek IP7142 and is the answer not in the manual?
General| Resolution | 640 x 480 |
|---|---|
| Image Sensor | 1/4" CMOS |
| Lens Type | Fixed |
| Aperture | F2.0 |
| Field of View (Diagonal) | 66° |
| Day/Night | Yes |
| Maximum Frame Rate | 30 fps |
| Multiple Video Streams | Yes |
| Audio Capability | Two-way audio |
| Power Source | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Operating Temperature (Max) | 50°C |
| Compression Format | MJPEG |
| Video Compression | MJPEG |
| Audio Output | 1 channel |
| Network Interface | 10/100Base-TX |
| Protocols | TCP/IP, HTTP, SMTP, FTP, DDNS, RTSP, RTP |
| Security | Password protection, IP filtering |
| Connectors | RJ-45, DC power input |
| Power Supply | 12V DC |
| Lens Focal Length | f=4.0 mm |
Step-by-step guide for physically installing the network camera.
Instructions for connecting the camera to a network and internet.
Enabling password protection, HTTPS, and IP filtering.
Configuring video recording, network storage, and notification.
Rebooting the camera and restoring factory default settings.
Steps to upgrade the camera's firmware.
To Next Page
