Vivotek IP7151 - Set server parameter values

- 67 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
dido, camctrl,
operator
camera’s parameters except some privilege and
network options
6 [admin] anonymous, viewer,
dido, camctrl,
operator, admin
Administrator’s access right can fully control the
camera’s operation.
7 N/A Internal parameters. Unable to be changed by
any external interface.
Get server parameter values
Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/getparam.cgi?[<parameter>]
[&<parameter>…]
http://<servername>/cgi-bin/viewer/getparam.cgi?[<parameter>]
[&<parameter>…]
http://<servername>/cgi-bin/operator/getparam.cgi?[<parameter>]
[&<parameter>…]
http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>]
[&<parameter>…]
where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you
do not specify the any parameters, all the parameters on the server will be returned. If
you specify only <group>, the parameters of related group will be returned.
When query parameter values, the current parameter value are returned.
Successful control request returns paramter pairs as follows.
Return: