tele To zoom without stop for farer view with current speed
vx <integer , excluding 0>
vy <integer>
The slope of movement = vy/vx, used for joystick control.
vs 0 ~ 7 Set the speed of movement, “0” means stop.
auto To do auto focus
far To focus on farer distance
focus
near To focus on nearer distance
auto Let the Network Camera control iris size
open Manually control the iris for bigger size
iris
close Manually control the iris for smaller size
speedlink 0 ~ 4 Issue speed link command.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter,
it will redirect to an empty page.
ePTZ Camera Control
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>][&auto=<value>][&zoom=<value>]
[&zooming=<value>&zs=<value>]
[&vx=<value>&vy=<value>&vs=<value>]
[&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=<value>]
[&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
stream <0~(m-1)> Stream.
To Next Page
Loading...
