Vivotek IP8161 - Page 133

VIVOTEK
User's Manual - 133
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
evctrlchannel <boolean> 0/7 Indicate whether to support HTTP tunnel for
event/control transfer.
joystick <boolean> 0/7 Indicate whether to support joystick
control.
storage_dbenabled <boolean> 0/7 Media files are indexed in database.
npreset <positive integer> 0/7 Number of preset locations.
eptz <positive integer> 0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
protocol_https < boolean > 0/7 Indicate whether to support HTTP over SSL.
protocol_rtsp < boolean > 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0/7 Indicate whether to support SIP.
protocol_maxconnec
tion
<positive integer> 0/7 The maximum allowed simultaneous
connections.
protocol_maxgenco
nnection
<positive integer> 0/7 The maximum general streaming
connections.
protocol_maxmegac
onnection
<positive integer> 0/7 The maximum megapixel streaming
connections.
protocol_rtp_multic
ast_scalable
<boolean> 0/7 Indicate whether to support scalable
multicast.
protocol_rtp_multic
ast_backchannel
<boolean> 0/7 Indicate whether to support backchannel
multicast.
protocol_rtp_tcp <boolean> 0/7 Indicate whether to support RTP over TCP.
protocol_rtp_http <boolean> 0/7 Indicate whether to support RTP over HTTP.
protocol_spush_mjp
eg
<boolean> 0/7 Indicate whether to support server push
MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 0/7 Indicate whether to support IPv6.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of available 0/7 Available resolutions list.