Vivotek IP8161 - Page 141

VIVOTEK
User's Manual - 141
countryname string[2] 6/6 Country name in the certificate information.
stateorprovincename string[128] 6/6 State or province name in the certificate
information.
localityname string[128] 6/6 The locality name in the certificate information.
organizationname string[64] 6/6 Organization name in the certificate information.
unit string[32] 6/6 Organizational unit name in the certificate
information.
commonname string[64] 6/6 Common name in the certificate information.
validdays 0 ~ 9999 6/6 Valid period for the certification.
Group: disk_i<0~(n-1)> n is the total number of storage devices.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 6/6 Enable cyclic storage method.
autocleanup_enabled <boolean> 6/6 Enable automatic clean up method.
Expired and not locked media files will be deleted.
autocleanup_maxage <positive integer> 6/6 To specify the expired days for automatic clean up.
Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
s<0~(m-1>_home <coordinate> 6/6 ROI left-top corner coordinate.
s<0~(m-1>_size <window size> 6/6 ROI width and height. (width must be 16x and height
must be 8x)
Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
osdzoom <boolean> 1/4 Indicates multiple of zoom in is “on-screen display” or not
smooth <boolean> 1/4 Indicates ePTZ is smooth or not.
tiltspeed -5 ~ 5 1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
panspeed -5 ~ 5 1/7 Pan speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
zoomspeed -5 ~ 5 1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
autospeed 1 ~ 5 1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)