Vivotek IP816A-HP - Page 166

VIVOTEK
166 - User's Manual
level1: wdr_mode=1,
wdr_strength=0
level2: wdr_mode=1,
wdr_strength=1
level3: wdr_mode=1,
wdr_strength=2
maxgain 0~100 100 4/4 Manual set maximum gain value.
mingain 0~100 0 4/4 Manual set minimum gain value.
autoiris <boolean> 0 4/4 Enable auto Iris.
7.10 IR cut control
Group: ircutcontrol(capability.nvideoinprofile> 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di0,
di1,
di2,
schedule
auto 6/6 Set IR cut control mode
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
disableirled <boolean> 0 6/6 Enable/disable built-in IR led
(capability.ir > 0)
enableextled <boolean> 0 1/6 Enable/disable external IR led
(capability.extir > 0)
bwmode <boolean> 1 6/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 6/6 Sensitivity of light sensor