Vivotek IP816A-HP - Page 185

VIVOTEK
User's Manual - 185
protocol_spush_mjpeg <boolean> 1 0/7 Indicate whether to
support server push
MJPEG.
protocol_snmp <boolean> 1 0/7 Indicate whether to
support SNMP.
protocol_ipv6 <boolean> 1 0/7 Indicate whether to
support IPv6.
protocol_pppoe <boolean> 1 0/7 Indicate whether to
support PPPoE.
protocol_ieee8021x <boolean> 1 0/7 Indicate whether to
support IEEE802.1x.
protocol_qos_cos <boolean> 1 0/7 Indicate whether to
support CoS.
protocol_qos_dscp <boolean> 1 0/7 Indicate whether to
support QoS/DSCP.
protocol_ddns <boolean> 1 0/7 Indicate whether to
support DDNS.
videoin_type 0, 1, 2 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_codec mjpeg, h264 mjpeg, h264 0/7 Available codec list.
videoin_c0_nmode <Integer> 3 0/7 Indicate how many video
modes supported by this
channel.
videoin_c0_rotation <boolean> 0 0/7 Indicate current mode
whether support video
rotation
videoin_c0_nresolution <positive
integer>
7 0/7 Number of videoin
resolution.
videoin_c0_resolution <a list of
available
resolution
separated by
commas>
<product
dependent>
176x144, 384x216,
640x360,1280x720,
1360x768,1600x904
0/7 Available resolutions list.
videoin_c0_maxframerate A list of
<Integer>
30,30,30,30,30,30,3
0
0/7 Indicate how many frame
rate image sensor outputs
in current video mode.