Vivotek IP816A-HP - Page 187

VIVOTEK
User's Manual - 187
"capability_videoin_codec
".
videoin_c0_mjpeg_maxbitra
te
<Positive
Integer>
40000000 0/7 Maximum bitrates of
MJPEG.
The unit is bps.
"-" means MJPEG does
not support bit rate
control.
* Only available when
'mjpeg' is listed in
"capability_videoin_codec
".
videoin_c0_h264_maxframe
rate
A list of
<Integer>
30,30,30,30,30,30,3
0
0/7 Maximum fps that the
device can encoded one
stream with H.264 on
resolutions in current
video mode.
"-" means not support.
* One to one mapping to
the resolution in
"resolution".
* The element number is
defined as "nresolution"
in this group.
* This parameter may be
changed when
"videoin_c<n>_cmosfreq
"=50 or
"videoin_c<n>_modulati
on"=pal.
Ex: 30 fps is changed to
25 fps, 60 fps is changed
to 50 fps, and so on.
* Only available when
'h264' is listed in
"capability_videoin_codec
".
videoin_c0_h264_maxbitrat <Positive 40000000 0/7 Maximum bitrates of