VIVOTEK
190 - User's Manual
* One to one mapping to
the resolution in
"resolution".
* The element number is
defined as "nresolution"
in this group.
* This parameter records
the frame rate when
"videoin_c<n>_cmosfreq
"=60 or
"videoin_c<n>_modulati
on"=ntsc
videoin_c0_mode0_maxfps_
mjpeg
<Integer> 30,30,30,30,30,30,3
0
0/7 Maximum fps that the
device can encode
videoin_c0_mode0_maxfps_
h264
<Integer> 30,30,30,30,30,30,3
0
0/7 Maximum fps that the
device can encode
videoin_c0_mode0_descripti
on
<String[128]
>
Dual Stream (Max.
30fps)
0/7 Description about this
mode
videoin_c0_mode1_rotation <boolean> 1 0/7 Indicate this mode
whether support video
rotation
videoin_c0_mode1_effective
pixel
<WxH> 1920x1080 0/7 The visible area of full
scene in this video mode.
The unit is pixel in source.
* This value must <=
"capability_videoin_c<n>
_maxsize"
* If "effectivepixel" <
"capability_videoin_c<n>
_maxsize", then the
visible area is located at
the center of full scene.
videoin_c0_mode1_outputsi
ze
<WxH> 1920x1080 0/7 The output size of source,
equal to the captured size
by device, in this video
mode. The unit is pixel.
This value is used as a
basic coordinate
To Next Page
Loading...
