Vivotek IP816A-HP - Page 195

VIVOTEK
User's Manual - 195
0: support only
/cgi-bin/viewer/camctrl.c
gi
uart_httptunnel <boolean> 1 0/7 Indicate whether to
support HTTP tunnel for
UART transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission
mode of the machine: TX
= server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to
support Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to
support wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to
support wireless
802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to
support wireless 802.11g.
wireless_s802dot11n <boolean> 0 0/7 Indicate whether to
support wireless 802.11n.
wireless_beginchannel 1 ~ 14 255 0/7 Indicate the begin
channel of wireless
network
wireless_endchannel 1 ~ 14 255 0/7 Indicate the end channel
of wireless network
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to
support wireless WEP.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to
support wireless WPA.
wireless_encrypt_wpa2 <boolean> 0 0/7 Indicate whether to
support wireless WPA2.
derivative_brand <boolean> 1 0/7 Indicate whether to
support the upgrade
function for the derivative
brand. For example, if the
value is true, the VVTK
product can be upgraded
to VVXX. (TCVV<->TCXX
is excepted)