Vivotek IP8337H-C - Page 155

VIVOTEK
User's Manual - 155
nuart 0,
<positive
integer>
0 0/7 Number of UART interfaces.
nmotion 0, <positive
integer>
3 0/7 Number of motion window.
nmotionprofile 0, <positive
integer>
1 0/7 Number of motion profiles.
ptzenabled 0, <positive
integer>
0 0/7 An 32-bit integer, each bit can be
set separately as follows:
Bit 0 => Support camera control
function;
0(not support), 1(support)
Bit 1 => Built-in or external video
source;
0(external), 1(built-in)
Bit 2 => Support pan operation,
0(not support), 1(support)
Bit 3 => Support tilt operation;
0(not support), 1(support)
Bit 4 => Support zoom operation;
0(not support), 1(support)
Bit 5 => Support focus operation;
0(not support), 1(support)
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT;
0(built-in), 1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate
lens_pan, Lens_tilt, lens_zoon,
lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
Examples:
PT8133: 0b1111
SD8362: 0b111111
VS8102: 0b10111101