Vivotek IP8337H-C - Region of Interest; Eptz Setting

VIVOTEK
170 - User's Manual
7.27 Storage management setting
Currently it’s for local storage (SD card)
Group: disk_i<0~(n-1)> n is the total number of storage devices.
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
name string[16] NULL 6/6 Disk name.
cyclic_enabled <boolean> 0 6/6 Enable cyclic storage method.
autocleanup_enabled <boolean> 0 6/6 Enable automatic clean up method.
Expired and not locked media files
will be deleted.
autocleanup_maxage 1~<positive
integer>
7 6/6 To specify the expired days for
automatic clean up.
7.28 Region of interest
Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI.
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home <coordinate> 0,0 1/6 ROI left-top corner coordinate.
s<0~(m-1)>_size <window size> 1280x800 1/6 ROI width and height. The width
value must be multiples of 16 and the
height value must be multiples of 8
7.29 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
osdzoom <boolean> 1 1/4 Indicates multiple of zoom in is
“on-screen display” or not
smooth <boolean> 1 1/4 Enable the ePTZ "move smoothly"
feature
tiltspeed -5 ~ 5 0 1/7 Tilt speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)