Vivotek IP8355EH - Page 173

VIVOTEK
User's Manual - 173
changed when
"videoin_c<n>_cmosfreq"=50
or
"videoin_c<n>_modulation"=p
al.
Ex: 30 fps is changed to 25 fps,
60 fps is changed to 50 fps, and
so on.
* Only available when 'h264' is
listed in
"capability_videoin_codec".
videoin_c0_h264_m
axbitrate
<Positive Integer> 40000000 0/7 Maximum bitrates of H.264.
The unit is bps.
* Only available when 'h264' is
listed in
"capability_videoin_codec".
videoin_c0_streamc
odec
<Positive Integer> 6,6 0/7 Represent supported codec
types of each stream.
This contains a list of positive
integers, split by comma. Each
one stands for a stream, and the
definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264
videoin_c0_mode <Integer> 0 0/7 Indicate current video mode.
videoin_c0_nmode <Positive Integer> 1 0/7 Indicate how many video modes
supported by this channel.
videoin_c0_maxsize <WxH> IP8365:
1920x1080
IP8355:
1280x1024
0/7 The maximum resolution of this
channel, the unit is pixel.
videoin_c0_nmode <Positive Integer> 1 0/7 Indicate how many video modes
supported by this channel.
Videoin_c0_maxsize <WxH> IP8365:
1920x1080
IP8355:
0/7 The maximum resolution of this
channel, the unit is pixel.