VIVOTEK
User's Manual - 101
Recording
Advanced Mode
This section explains how to congure the recording settings for the Network Camera.
Recording Settings
► Before setting up this page, please set up the Networked Storage on the Server Settings page rst.
► Please remember to format your SD card when using for the rst time. Please refer to page 105 for
detailed information.
Network Storage Setting
Click on the Server button at the top to open the Applications > Server Settings page and follow the steps
below:
1. Fill in the information for your server. For example:
2. Click Test to check the setting. The result will be shown in the pop-up window.
1
2
3
4
Network storage path
(\\server name or IP address\folder name)
User name and password for your server
Insert your SD card and click here to test
NOTE:
To Next Page
Loading...
