VIVOTEK
User's Manual - 81
Patrol Settings
You can select some preset positions for the Network Camera to patrol through them.
Please follow the steps below to set up a patrol schedule:
1. Click a preset location on the list and click Select.
2. The selected preset location will be displayed on the Source list.
3. Set the Dwelling time for the eld of view to stay at the preset location during patrol. You can also
manually enter a value in the blank and click Update.
4. Repeat step 1 through 3 to select additional preset locations.
5. If you want to delete a selected location, select it from the Source list and click Remove.
6. Select a location and click Up or Down to rearrange the patrol order.
7. Click Save to enable the settings.
1
2
6
5
7
3
To Next Page
Loading...
