EasyManua.ls Logo

Vivotek IP8361 - Page 152

Vivotek IP8361
171 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIVOTEK
152 - User's Manual
cyclesize 20~ 6/6 The maximum size for cycle recording in Kbytes when
choosing to limit recording size.
reserveamount 100~ 6/6 The reserved amount in Mbytes when choosing cyclic
recording mechanism.
dest cf,
0~4
6/6 The destination to store the recorded data.
“cf” means CF card.
“0~4” means the index of the network storage.
cffolder string[128] 6/6 Folder name.
filesize 1~100 6/6 Unit: Mega bytes.
When this condition is reached,
Recording file is truncated.
duration 1~60 6/6 Unit: Minute.
When this condition is reached,
Recording file is truncated.
trigger schedule,
networkfail
6/6 The event trigger type
Schedule: The event is triggered by schedule
Networkfail: The event is triggered by the failure of
network connection.
adaptive_enable 0,1 6/6 Indicate whether the adaptive recording is enabled.
adaptive_preevent 0~9 6/6 Indicate when is the adaptive recording started before
the event trigger point (seconds).
adaptive_postevent 0~10 6/6 Indicate when is the adaptive recording started after the
event trigger point (seconds).
Group: https (product dependent)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 To enable or disable secure HTTP.
policy <Boolean> 6/6 If the value is 1, it will force HTTP connection redirect to
HTTPS connection
method auto,
manual,
install
6/6 auto => Create self-signed certificate automatically.
manual => Create self-signed certificate manually.
install => Create certificate request and install.
status -3 ~ 1 6/6 Specify the https status.
-3 = Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0 = Not installed
1 = Active

Table of Contents

Other manuals for Vivotek IP8361

Related product manuals