Vivotek IP8361 - Page 163

VIVOTEK
User's Manual - 163
IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index
=<value>][&return=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return
=<return page>]
PARAMETER VALUE DESCRIPTION
type NULL Get IP filter type
allow, deny Set IP filter type
method addv4 Add IPv4 address into access list.
addv6 Add IPv6 address into access list.
delv4 Delete IPv4 address from access list.
delv6 Delete IPv6 address from access list.
ip <ip
address>
Single address: <ip address>
Network address: <ip address / network mask>
Range address:<start ip address - end ip address>
index <value> The start position to add or to delete.
return <return
page>
Redirect to the page <return page> after the parameter is assigned.
T
he
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty
page.
s<0~(m-1)>_h26
4_profile
0~2 4/4 0 => Baseline profile
1 => Main profile
2 => High profile