Vivotek IP8362 - Page 123

VIVOTEK
User's Manual - 123
settings.
Ex:
Change HTTP port from 80 to 5556, and change RTP port
for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=5556&
network_rtp_videoport=20480”
type lan,
pppoe
<product
dependent>
6/6 Network connection type.
resetip <boolean> 6/6 1 => Get ipaddress, subnet, router, dns1, dns2 from
DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1, and
dns2.
ipaddress <ip address> 6/6 IP address of server.
subnet <ip address> 6/6 Subnet mask.
router <ip address> 6/6 Default gateway.
dns1 <ip address> 6/6 Primary DNS server.
dns2 <ip address> 6/6 Secondary DNS server.
wins1 <ip address> 6/6 Primary WINS server.
wins2 <ip address> 6/6 Secondary WINS server.
7.6.1 802.1x
Subgroup of network: ieee8021x (capability.protocol.ieee8021x > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable/disable IEEE 802.1x
eapmethod eap-peap,
eap-tls
6/6 Selected EAP method
identity_peap String[64] 6/6 PEAP identity
identity_tls String[64] 6/6 TLS identity
password String[254] 6/6 Password for TLS
privatekeypassword String[254] 6/6 Password for PEAP
ca_exist <boolean> 6/6 CA installed flag
ca_time <integer> 6/7 CA installed time. Represented in EPOCH
ca_size <integer> 6/7 CA file size (in bytes)